Hyper SL Paddles

Sale price97.00 SAR

Please follow the instructions below to avoid damaging the HSL paddle screws. Stripped screws are NOT covered by warranty. Please proceed with caution.

HSL Paddle Instructions:
Follow these steps for EACH paddle you replace.

  1. Heat the paddle screws for about 10 seconds with a heat gun or hairdryer. This will release the thread locker and make removing the screws much easier.
  2. Using a manual 2MM HEX bit, push firmly and SLOWLY start to loosen the screw by turning counter-clockwise by hand. Using an electric screwdriver with too much torque/speed will increase the chances of stripping the screwhead. 
  3. Install your new paddles using the provided replacement screws.

Which paddles will I receive?
Because the Hyper SL shares the same clutch paddle design as the Hyper P1, you will receive only the Shifter and/or Top paddles, depending on your order configuration.

Configuration:4-Paddles / Aluminum
Pickup available at 1167 Mississippi Avenue #100 Usually ready in 5+ days

Hyper SL Paddles

4-Paddles / Aluminum

1167 Mississippi Avenue #100

Pickup available, usually ready in 5+ days

1167 Mississippi Avenue #100
Dallas TX 75219
United States